CUMMINS ALLISON JetSort LX - Safety, Power, and Compliance; Safety Information and Power Specifications

2 | JetSort
®
LX Attended coin sorter | Safety information, power specications
Safety information, power specifications
High voltage inside. Risk of electric shock.
Do not attempt repairs. Repairs must be made by authorized
Cummins Allison personnel.
Plug three-prong grounded plug (supplied) into properly grounded
three-prong outlet.
Read and understand all instructions before use.
Sort disk rotates when motor is running. Risk of injury.
Do not defeat safety interlock switches.
Improper voltage levels can cause equipment malfunction,
damage electrical components, and void warranty.
Provide separate circuit serving only this device and follow listed
power requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
•Voltageoperatingrange:105–253 VAC, automatic switching
•Frequency:50/60 Hz
•Fullloadamps(FLA):4.5/9A
•Electricalsupplycircuit: The customer must provide a single-phase, dedicated power line that meets the
machine’s power requirements. Use a properly grounded circuit breaker in compliance with applicable local
electrical code.
Environmentaloperatingconditions
•Temperature: 60°F - 85°F (15°C - 29°C)
•Humidity: 30% to 70% (non-condensing)
Complianceacknowledgments
•Laser: This equipment may contain Class 2 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter 1 and the international laser safety standard IEC-60825.1-2001-08.
• FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•Regulatory: UL/CUL/EU, FCC/CE