Why is the water from my Cuno AP faucet cloudy?
Cloudy water or air coming from your Cuno Water System faucet can occur due to carbon fines or trapped air in the filter and water lines. To resolve this, flush the filter for five minutes.
How to fix water leaks at push-in connections in Cuno AP?
To fix water leaks at push-in connections in your Cuno Water System: * Ensure the tubing is pushed in as far as it can go. * Shut off the water at the valve and remove the water line by pushing in on the connector collar while pulling the tubing away. * Inspect the tubing for any cracks or scratches. If damaged, cut away the affected portion and reinsert the tubing. * Also, make sure the tubing is cut straight; if not, recut it.
Instructions for connecting and disconnecting tubing using push-in fittings.
Procedures for drilling holes in countertops or sinks for faucet mounting.
Steps for mounting the drinking water faucet onto the sink or countertop.
General| Brand | Cuno |
|---|---|
| Model | AP |
| Category | Water System |
| Language | English |
To Next Page
