Operating steps
Turn on the electricity and add water
outer
When fininshing foot massage
Power off the footbath into standby mode, unplug the power supply, and pour
out the water; Restore the supporting rod to its original position and then press
to fold the front and back ends of the footbath, and place the folded footbath.
Clean
a. Please make sure the plug is unplugged before cleaning
b. Pour out the water from the tub
c. Wipe the surface of the foot spa with a soft cloth
d. Do not wipe the power cord socket with a water-soaked towel
e. Do not clean the foot spa with corrosive liquids
Store
a. Cut off the power supply, unplug the power cord from the machine, and pour
out the water
b. Pour out the water and place it in a safe, ventilated, dry, and cool place to drain
c. Fold the foot bath and the power cord. Put it in the packing box, and then
place it in a safe, ventilated, dry and cool place
To Next Page
Loading...