Need help?Do you have a question about the Cuppone Giotto GT110 and is the answer not in the manual?
Crucial safety instructions for oven installation, operation, and maintenance.
Mandates minimum safety clearances from flammable materials and prohibits explosive environments.
Emphasizes shutting off power, checking voltage, and mandatory grounding connections.
Warns against switching off the oven while the refractory surface is rotating.
Details Display 1 for upper element percentage and associated +/– keys.
Explains Display 2 for set/actual chamber temperature and program number.
Covers Display 3 for set/actual surface temperature and buzzer/countdown time.
Describes keys for adjusting surface temperature and cooking/countdown times.
Details Display 4 for lower element percentage and associated +/– keys.
Explains controls for oven light, hood light, and timer/countdown activation.
Warns about keeping the area clear of combustibles and risks of burns.
Advises turning off the oven on anomaly and contacting service; stresses original parts.
Highlights the need for qualified personnel, supervision, and child safety.
Notes that parameter changes made in selection mode are temporary.
Warns not to turn off the oven while the refractory surface is rotating.
Indicates a fault in the upper heating element thermocouple.
Signals a problem with the power board heatsink probe or high temperature alert.
Points to a cold junction probe fault or high temperature alert on the control board.
Indicates a fault in the lower heating element thermocouple.
Crucial warning to disconnect power before any maintenance operations.
Advises turning off the light during pyrolysis to preserve the bulbs.
Strictly prohibits direct water jets and the use of abrasive or chlorinated cleaning agents.
Emphasizes switching off the main power, not just the oven, before replacing lamps.
To Next Page
General