Cupra Charger Series User Manual

PART A ENGLISH / ESPAÑOL
POLSKIE / ΕΛΛΗΝΙΚΆΕΛΛΗΝΙΚΆ
POWERED BY
CUPRA CHARGER
MANUAL

Cupra Charger Series Specifications

General

Connector Type	Type 2
Connectivity	Wi-Fi
Authentication	RFID, App
Cable Length	5 m
Protection	IP54
Input Voltage	230 V

Summary

Configure CUPRA Charger Connect and CUPRA Charger Pro

Configure CUPRA Charger Connect and CUPRA Charger Pro locally

Local setup and configuration of the wallbox via Wi-Fi.

Pair CUPRA Charger Connect and CUPRA Charger Pro to App account

Linking the wallbox to the CUPRA account for app control.

Configure the CUPRA Charger Connect and CUPRA Charger Pro Locally

Step-by-step guide for local configuration via Wi-Fi.

Pair CUPRA Charger Connect and CUPRA Charger Pro to CUPRA Account

Instructions for linking the wallbox to the CUPRA account via the app.

Safety Precautions

Highlighted Sections

DANGER

Information regarding hazardous situations causing death or severe injury.

Warning

Caution

Technical Specifications

Electrical Properties

Safety and Certification

Charge with the Wallbox

Start and Stop a Charging Session

Step-by-step guide on initiating and ending a vehicle charging session.

Status Indication

Prepare for Installation

Prerequisites for Installation

Tools and Material Needed

Provided Materials

Notice on Installation

Power Supply Wiring

Install Wallbox

Install Wall Bracket

Instructions for mounting the wall bracket securely to the wall.

Prepare Main Assembly for Installation

Mount Main Assembly onto Wall Bracket

Guidance on attaching the main wallbox assembly to the installed bracket.

Assemble Wallbox

Detailed steps for connecting internal cables and assembling the wallbox.

Set DIP-Switches

Commissioning

Maintenance

Troubleshooting

Error States of the Wallbox

Adjust the Length of the Charging Cable

Decommissioning