Current LOOP User Manual

NOTE: For easy assembly - all components and hardware packs are
marked for each step. For a clean install, always have screw head face
the outside and wing nut facing back side.
LOOP Display Rack
Assembly Instructions
Register Your Store!
Step 1:
Slide the two back panels together ensuring
aluminum cross bar fits into “T” fittings (items marked STEP
1). Attach two back panels to main display stand using
Hardware Pack 1.
Step 2:
Attach 2 side bins (items marked STEP 2) to back
panels and main display stand using Hardware Pack 2.
Step 3: Slide sign header side bars into “T” fitting behind Step 4: Attach the side shelving units to left side of rack and
back panel (items marked STEP 4) using Hardware Pack 4.
Ensure your store is listed on our Authorized Dealer Map as a PREMIER LOOP dealer, visit:
http://current-usa.com/support/product-registration
For additional sales training videos and support, visit www.current-usa.com/support/dealer-support
sign header and attach using screws, attach light fixture
support arm to back horizontal
bar (items are marked STEP 3)
using Hardware Pack 3. Slide
sign header side bars into “T”
fitting on main display rack.
Side
Bar
Side
Bar
Ensure 2 holes on horizontal bar
match 2 holes on back panel.
Front of rack
(side viewed)
Back of rack
(not in view)

Current LOOP Specifications

General

Brand	Current
Model	LOOP
Category	Racks & Stands
Language	English

Summary

Assembly Instructions

Assemble Back Panels

Slide back panels together and attach to main display stand using Hardware Pack 1.

Attach Side Bins

Attach 2 side bins to back panels and main display stand using Hardware Pack 2.

Continue Assembly Steps

Mount Hinge Kit

Mount the LOOP Hinge Kit assembly to the center shelf of the main stand using Hardware Pack 5.

Install LED Light

Install the Orbit IC LED light into the light fixture support arm by sliding light through the fixture clip.

Connect Lighting Cables

Feed light fixture and transformer cable through the back panel and connect to the lighting manifold.

Install Graphic Support

Install the front graphic support to the main stand using Hardware Pack 8.

Attach Graphic Panels

Carefully attach the graphic panels as shown using Velcro.

Install Sliding Door

Install the front sliding door to the main stand.