page 7
Curtis 1311 Manual
3.2 Main Menu
The Main Menu is the starting point for all Curtis programma-
ble products. All basic functions are readily accessed from this
point.
Program
The Program Menu may contain several Sub-Menus of parame-
ters. The unit (controller, charger, display, etc) is setup with
specific operating conditions using the 1311 handheld program-
mer in this Menu. Items like max speed, current limits, time-
outs, and modes are common parameters set in the Program
Menu.
Monitor
The Monitor contains a list of all the variables that can be read
and displayed. Common items are battery voltage, throttle posi-
tion, input status and temperature. If the list is too long, Sub-
Menus may be used to categorize them.
Faults
The Faults Menu provides the present status and access to past
fault history.
Functions
The 1311 handheld programmer can also be used to copy data
between units, reset data and many other functions unique to
the unit. The Functions Menu provides access to these.
Information
When the unit is connected to the 1311 handheld programmer,
information, such as software, hardware and parameter block
versions are also uploaded. The Information Menu provides a
quick overview.
Programmer Setup
There are several setup options and information that can be
accessed in this Menu.
To Next Page
Loading...