To Next PageTo Next Page
Need help?Do you have a question about the Curtis Cab and is the answer not in the manual?
Cab design features for vehicle variation adjustment and proper weather protection.
Key reminders for assembly, part identification, and initial bolt tightening.
Critical safety precautions regarding fuel, rollover, objects, lightning, and hot components.
Removing original screws from the vehicle floorboard before installing the cab.
Attaching 'P' clamps to the rear and side tubular frames for cab mounting.
Mounting side frames, installing hip restraint brackets, and securing floorboards.
Installing the windshield support bracket to the side frame with bolts and washers.
Securing the windshield using flat head bolts, spacers, and locknuts, with torque limit.
Tightening all cab assembly bolts to ensure structural integrity.
Installing the rear window and securing it with bolts and washers, plus vinyl filler attachment.
Mounting the roof/console, routing wires for optional accessories, and securing the assembly.
Attaching gas shocks to the windshield and connecting power and key-controlled wires to the battery.
Final checks: rubber flap sealing, antenna adjustment, wiper installation, and hardware management.
Detailed instructions for cleaning acrylic windows, glass, doors, and body panels.
Cab design features for vehicle variation adjustment and proper weather protection.
Key reminders for assembly, part identification, and initial bolt tightening.
Critical safety precautions regarding fuel, rollover, objects, lightning, and hot components.
Removing original screws from the vehicle floorboard before installing the cab.
Attaching 'P' clamps to the rear and side tubular frames for cab mounting.
Mounting side frames, installing hip restraint brackets, and securing floorboards.
Installing the windshield support bracket to the side frame with bolts and washers.
Securing the windshield using flat head bolts, spacers, and locknuts, with torque limit.
Tightening all cab assembly bolts to ensure structural integrity.
Installing the rear window and securing it with bolts and washers, plus vinyl filler attachment.
Mounting the roof/console, routing wires for optional accessories, and securing the assembly.
Attaching gas shocks to the windshield and connecting power and key-controlled wires to the battery.
Final checks: rubber flap sealing, antenna adjustment, wiper installation, and hardware management.
Detailed instructions for cleaning acrylic windows, glass, doors, and body panels.
General| Brand | Curtis |
|---|---|
| Model | Cab |
| Category | Automobile Parts |
| Language | English |
