5-4
FibreXtreme User Guide
INSTALLATION
Copyright 2017
To install the SL240 PCIe card, push the card into an available X8, X16, or x32 PCIe slot on the
motherboard as shown in Figure 5-1 step 1 and 2, until it is firmly seated. Install the mounting
screw as shown in step 3.
NOTE: The SL240 PCIe requires an x8 PCIe bus slot for proper operation. The board
cannot be installed in an x4, x2, or x1 PCIe bus slot.
Figure 5-2 SL240 PCIe Card Installation
To Next Page
Loading...