APPENDIX A
7-3
FibreXtreme User GuideCopyright 2017
7.1 Specifications
NOTE: “Peak” current specifications are based on measurements taken while the card
was transmitting and receiving large buffers of data. All current requirement measurements
were taken on a Quad core processor 3.4 GHz system.
CAUTION: Power usage is highly system dependent and varies from system to system.
7.1.1 SL240 PCIe Specifications
Physical Dimensions: 174.6 mm x 106.7 mm
(6.87 inches x 4.173 inches)
Weight: » 0.25 lbs
Operating Voltage:
12 volt supply 11.75 Volts to 12.25 V
Power Dissipation:
12 Volt Supply 21.6 Watts Peak @ 12 V
Electrical Requirements:
12 Volt Supply 1.8 Amps Peak
Temperature Requirements:
Storage -40° to +85°C
Operation 0° to +50°C, with 200 LFM air
minimum
Humidity Range :
Storage 0% to 95% (noncondensing)
Operating 10% to 90% (noncondensing)
Maximum Node Separation:
Standard Fiber 300 meters
Mean Time Between Failures (MTBF)*:
SL240 PCIe, Short wavelength lasers: 522,521 hours
*These MTBF numbers are based on calculations using MIL-HDBK-217 FN2, Appendix A,
Telcordia (Belcore) Method 1 Case 3 for a GB, GC at 30° C.
To Next Page
Loading...