Need help?Do you have a question about the CUSHCRAFT A270-10S and is the answer not in the manual?
Choose an open location to minimize interference from surrounding objects like trees and power lines.
Mounting bracket accommodates up to 2" O.D. mast; consider rotator and antenna spacing for multiple antennas.
Direct grounding is crucial for lightning, static, and high voltage protection, using #10AWG wire and a coaxial arrester.
Assemble the boom by sliding tube BB into tube BA, securing with a machine screw and worm clamp.
Attach driven element tubes and connector brackets, then the Reddi-Match sub-assemblies using hardware.
Sort elements by size and attach them to the boom according to figures C and D for proper positioning.
Prepare feedline connectors by applying silicone grease to threads and outer shells, then sealing with boots.
Mount the antenna to the mast using the provided plate and U-bolts, ensuring the danger label is visible.
Secure feedline to mast, apply silicone grease to T-connector and PL-259 threads, and seal with boots.
Details include boom length, element length, turning radius, gain, front-to-back ratio, SWR, power, and beamwidth.
One-year warranty against defects in material or workmanship; excludes misuse, neglect, or improper installation.
General| Type | Yagi |
|---|---|
| Gain | 10 dBd |
| Number of Elements | 10 |
| VSWR | 1.5:1 |
| Impedance | 50 Ohms |
| Polarization | Horizontal |
| Radiation Pattern | Directional |
To Next Page
