4
BEFORE FIRST USE
1. Remove and safely discard any packaging material and promotional
labels before using the appliance for the first time.
2. Wipe the appliance with a soft damp cloth and dry thoroughly.
3. Place the appliance on a dry, level heat resistant surface.
4. Completely unwind power cord and insert power cord into a 120V
power outlet. Switch on at the power point.
5. Place a saucepan, in which the food will be cooked, on the appliance.
6. Select the desired temperature setting using the temperature control
knob.
The temperature settings are adjustable and can be changed at any time
during the cooking.
NOTE:
The “heating” indicator light will illuminate when the appliance is preheating
and cooking. The heating light may cycle on and off during operation. This
cycling is normal and indicates that the correct temperature is being
maintained.
NOTE:
When turned on for the first time, the appliance may give off vapours for up to
15 minutes. This is due to the protective substances on the heating elements.
There is no need for concern and the vapours will dissipate with use.
NOTE:
To achieve optimum performance, ensure the diameter of the cooking pot or
pan is no larger than the diameter of the appliance.
To switch the appliance off, turn the temperature control knob to the OFF
position and turn the power off at the power outlet and unplug power cord.
WARNING!
Fully unwind power cord before use. Do not allow power cord to come in
contact with the appliance. Do not move the appliance until it is completely
cooled down.
Operating your Cusimax product
To Next Page
Loading...
