Need help?Do you have a question about the Cutler-Hammer SV9000 and is the answer not in the manual?
Provides an overview of connecting SV9000 drives to a LONWORKS network via the SV9NCLCN option board.
Explains the manual's purpose and assumptions regarding user familiarity with SV9000 drives and LONWORKS.
Emphasizes reading safety instructions and highlights potential electrical hazards associated with internal components.
Details LONWORKS technology, its applications, and the goal of providing a vendor-independent communication network.
Describes LONWORKS network physical media, including FTT-10A transceiver and various topology options.
Explains the requirement for bus termination in FTT-10 networks and how to select termination using jumper X6.
Describes the function of the service button for network installation and the service LED for indicating device operating states.
Illustrates the LONWORKS option board layout, identifying key terminals and diagnostic LEDs.
Details the terminal assignments and signals for I/O and control connections, including encoder and thermistor inputs.
Introduces the predefined network variables, categorized into input, output, and configuration types.
Lists and describes network input variables for controlling the SV9000, such as frequency reference and start/stop commands.
Lists and describes network output variables providing SV9000 status, like actual frequency, motor current, and fault codes.
Details network configuration variables used to set parameters like timeouts, send intervals, and data change thresholds.
General| Brand | Cutler-Hammer |
|---|---|
| Model | SV9000 |
| Category | Network Hardware |
| Language | English |
To Next Page