Product and battery standards
Model Number WC40000F25W
Oscillation Frequency 40 kHz
Body Dimensions 175 x 102 x 62 mm
Handle Dimensions Ø 28 x 104 mm
Body Weight Approx. 670 g
Handle Weight Approx. 85 g
Max. Power Consumption 30W
Charger
INPUT: AC100~240V, 50/60Hz, 1.5A MAX
Ambient Condition 5 ~ 35
℃
Use Time
Approx. 1 hr 30 min. cycled
Type Lithium-Ion battery
Nominal Capacity 2600 mAh
Rated Voltage 11.1 V
Battery Charging Time Approx. 2 hrs
Usage period
300 cycles
11 Self-diagnosis
Before requesting repair
When the product does not function, check the following before requesting any type of repair.
Symptoms Checklist Solutions
The power button won
'
t turn
on.
Is there any remaining
battery?
Connect the charger to the
back side of the main body.
The handle switch won
'
t work.
Is the power button off? Turn the power button on.
Was the handle switch pressed
for a moment only?
Continuously press the handle
switch.
Is the LED light on the
handle off?
After 10 minutes of use the
product automatically turns
to stand-by state. Press
the handle switch to use
the product again after
cooldown for safe use.
To prevent the product from
overheating, it automatically
stops operating and turns into
the stand-by state.
Turn the
power off and tighten the
setscrew before restarting.
The handle makes noise
and it does not cut well.
Is the blade fixed? Fix the blade and setscrew
tight.
Is the blade bent or broken?
Is the blade setscrew
To Next Page
Loading...
