To Next PageTo Next Page
Need help?Do you have a question about the Cutters Edge CE-970RH SERIES and is the answer not in the manual?
Identifies various safety and operational symbols found on the machine.
Defines the meaning and severity of different warning levels used in the manual.
Highlights unique technological advancements and benefits of the Cutters Edge product line.
Outlines owner's duties for safe operation and manufacturer's design reservations.
Illustrates and lists the various parts of the CE770 RH model power cutter.
Illustrates and lists the various parts of the CE970 RH model power cutter.
Illustrates and lists the various parts of the CE1270 RH model power cutter.
Details essential personal protective equipment required for safe operation.
Explains the function and checks for throttle lockout, stop switch, and blade guard.
Describes the system designed to reduce operator exposure to vibration.
Discusses the importance of the muffler and associated fire hazards.
Guides on choosing appropriate cutting blades for high-speed handheld saws.
Explains causes of blade vibration and specific considerations for abrasive blades.
Details suitability of blades for various cutting materials like concrete and metal.
Provides instructions for safe and effective use of diamond cutting blades.
Outlines proper procedures for transporting and storing cutting blades.
Instructions for inspecting drive shaft and flange washers during blade replacement.
Details on adjusting the blade guard and correctly fitting the cutting blade.
Specifies the types of oil and gasoline required for the two-stroke engine.
Details the correct mixing ratios and steps for preparing the fuel mixture.
Provides crucial safety instructions for refueling the power cutter.
Advises on preparing the machine for extended periods of non-use.
Outlines essential safety measures for the working environment.
Covers fundamental methods for operating the power cutter safely and effectively.
Guides on correct posture, grip, and handling of the power cutter.
Explains how to use the water flushing system for dust suppression.
Explains the causes and dangers of kickback during operation.
Provides specific safety advice for cutting pipes with the machine.
Details how reactive force and blade pinching lead to kickback.
Discusses climbing kickback and the importance of workpiece support.
Offers guidelines for safely transporting and storing the power cutter.
Essential pre-start checks specific to the CE770 RH model.
Step-by-step guide for starting a cold CE770 RH engine.
Essential pre-start checks specific to the CE970 RH model.
Step-by-step guide for starting a cold CE970 RH engine.
Essential pre-start checks specific to the CE1270 RH model.
Step-by-step guide for starting a cold CE1270 RH engine.
Instructions for safely shutting down the power cutter's engine.
General warnings and advice for performing maintenance tasks.
A table outlining daily, weekly, and monthly maintenance tasks.
Procedures for cleaning the exterior and cooling air intake.
How to check, clean, and set the gap for the spark plug.
Guidance on checking the drive belt's condition and tension.
Step-by-step instructions for replacing the drive belt on CE770/CE970.
Instructions for adjusting the carburetor, including idle speed.
Procedures for cleaning the exterior and cooling air intake for CE1270.
How to check and set the spark plug gap for CE1270.
Instructions for checking and adjusting the drive belt tension on CE1270.
Step-by-step instructions for replacing the drive belt on CE1270.
Procedures for adjusting the CE1270 carburetor and idle speed.
Instructions for replacing a broken or worn starter cord.
Guidance on changing the recoil spring in the starter housing.
Steps to properly tension the recoil spring after assembly.
Instructions for correctly fitting the starter mechanism onto the engine.
Checks for fuel cap, hose, and fuel filter condition.
Guidance on inspecting wear on the drive gear and clutch components.
Details on checking and replacing the air filter for the CE770 RH model.
Details on checking and replacing the air filter for CE970/1270 RH models.
Technical specifications including motor, ignition, fuel, and cutting equipment for CE770 RH.
Technical specifications including motor, ignition, fuel, and cutting equipment for CE970 RH.
Technical specifications including motor, ignition, fuel, and cutting equipment for CE1270 RH.
Details the duration and scope of the emission control system warranty.
Outlines owner's duties for warranty and procedures for filing claims.
Lists parts covered under the emission control warranty.
General| Brand | Cutters Edge |
|---|---|
| Model | CE-970RH SERIES |
| Category | Saw |
| Language | English |
