When to replace Cyber Power BP36V60ART2U Battery Pack battery?
If your Cyber Power Battery Pack displays 'Replace Battery', it means the battery will soon need replacing due to insufficient runtime. Contact technical support to replace the battery.
What to do if Cyber Power BP36V60ART2U shows Battery Failure?
If your Cyber Power Battery Pack indicates 'Battery Failure', it means the UPS has failed a Battery Test. First, check the battery connector and battery breaker. If the issue persists, contact technical support to replace the battery.
What to do if Cyber Power BP36V60ART2U is over charging?
If your Cyber Power Battery Pack is experiencing an 'Over Charge' issue, it indicates that the battery is overcharged. Remove the battery connector and check the charger voltage. If the problem continues, contact CyberPower for repair.
How to fix BAT Disconnected on Cyber Power BP36V60ART2U?
If the Cyber Power Battery Pack shows 'BAT Disconnected', it indicates missing battery power. Check the battery connector and battery breaker.
General| Voltage | 36V |
|---|---|
| Capacity | 60Ah |
| Form Factor | 2U Rackmount |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Dimensions (L x W x H) | 19.0 x 17.2 x 3.5 inches |
| Storage Temperature | -20°C to 45°C (-4°F to 113°F) |
| Design Life | 5 years |
Instructions for mounting the EBM in a standard 4-post server rack.
Important safety warnings to prevent electric shock during hardware installation.
Steps to adjust and attach rackmount rails to the server rack for proper fit.
Instructions for placing and securing the EBM onto the installed rack rails.
Guidance for installing the EBM in a 2-post rack system.
Steps for mounting the EBM in a vertical or tower orientation.
Critical safety advice for installation and handling of the EBM in vertical orientation.
Detailed steps for safely replacing the batteries within the EBM.
Important safety warnings related to battery handling and replacement.
To Next Page