2.4A USB
PROTECTED
GROUNDED
2
1
3
5
4
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSP600WSURC2 Surge
Protector. The information contained in this brochure explains
the features and operation of the CSP600WSURC2/MP1028WW.
Please take a few moments to read this manual.
FEATURES
1. Surge Protected Indicator
Illuminated when the surge protection feature is working
properly.
2. Ground Indicator LED
Illuminated when the Ground protection feature is working
properly.
3. Six Standard Outlets
4. Pivoting Outlets
Pivoting outlets for ease of use and convenience
5. USB Charging Ports*
Connect and charge up to two (2) USB devices using the surge
protected USB powering ports.
*USB outlets cannot be used as a USB hub. This device does
not transfer data.
SPECIFICATIONS
• Model Number: CSP600WSURC2/MP1028WW
• Outlets: 6 Standard Outlets
• Surge Protection: 1200 Joules
• Electrical Rating: 125V/15A/1875W
• USB charger rating: 5V/2.4A total
• UL Clamping Voltage: UL 1449 3rd/400V (H-N, N-G),
500 (H-G)
• Maximum Peak Current: 60,000A
• 3 AC Lines Protected: H-N: 30,000A, H-G: 15,000A,
N-G: 15,000A; (The maximum surge possible on household
Wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
8-Outlet Surge Protector
(6 AC & 2 USB ports)
CSP600WSURC2 / MP1028WW
USER MANUAL
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment. DO NOT use if
properly grounded outlets are not available. DO NOT install this
device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and electrical service panel. This
device features an internal protection that will disconnect the
surge protective component at the end of its useful life, but will
maintain power to the load – now unprotected.
TROUBLESHOOTING
If the Grounded indicator does not light when you plug in
the surge protector,move the surge protector to a dierent
grounded three-prong AC outlet. If it still does not light, return
the product to dealer for assistance. If the surge protector
proves to be working properly, your outlets may not be properly
grounded and should be inspected by a professional electrician.
If the Grounded indicator turns o after a period of use, the
surge protection has been depleted. Replace your surge
protector.
If the Protected indicator does not light, the surge protector’s
AC line is no longer protected from surge. Replace the surge
protector. The surge protector may have received a power surge
or spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge protector
has protected your connected equipment but it will not protect
against future surges and spikes.
TECHNICAL SUPPORT
Please contact our Tech Support department with installation,
troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST
To Next Page
Need help?
General