CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
Doc. 931050B Page 47
Verify the Nightringer is Registered
After the SPA has rebooted and initialized, refresh the Home page of the web interface. Your
device should show as [Registered with SIP Server] in green text on the bottom of the Home
Page of the web interface as well as at the top of the Nightringer Configuration page next to
Enable Nightringer. See Figure 5-17 and Figure 7-2.
Additionally, you may verify the Nightringer is registered with RingCentral through the admin
portal. From the Phones & Devices menu, select User Phones and the IP Phone you just
created for the Nightringer. The status should show as “online” in the Phone Details.
Figure 7-4. Nightringer Phone Details – Status
Make a Test Call
Once Nightringer has registered with RingCentral, you may use any RingCentral phone to dial
the Nightringer extension.
To Next Page
Loading...
