Cybernet CyberMed-NB22 Series User Manual

1
NB22 Users Manual
CyberMed-NB22,iOne-NB22 Series
Users Manual
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below.
 Reorient or relocate the receiving antenna.
 Increase the distance between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/television technician for help.
Notice 1 The changes or modifications not expressly approved by the party
Responsible for compliance could void the user's authority to operate the
equipment.
Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in
order to comply with the emission limits.
Trademarks
All trademarks are the properties of their respective owners.
Intel® is a registered trademarks of Intel Corporation.
Windows® 10/8.1/ 7/Vista/XP/NT/2000/98/95 are registered trademarks of Microsoft
Corporation. Award® is a registered trademark of Phoenix Technologies Ltd.
AMI® is a registered trademark of American Megatrends Inc.

Cybernet CyberMed-NB22 Series Specifications

General

Category	Desktop
Processor	Intel Core i5/i7
Resolution	1920 x 1080
Bluetooth	Bluetooth 4.0
Storage	2.5" SATA HDD/SSD
Touchscreen	Optional Projected Capacitive
Ethernet	2 x Gigabit Ethernet (RJ45)
Wireless	802.11ac
I/O Ports (Rear)	USB 2.0
Ports	USB, HDMI, VGA, RJ-45
Expansion Slots	Mini PCIe
Operating System	Windows 10
Certifications	CE, FCC

Summary

FCC Radio Frequency Interference Statement

Trademarks

Lists registered trademarks of Intel, Microsoft, Phoenix, and American Megatrends.

Safety Instructions

General Safety Precautions

Covers handling, environment, power, and laser safety for the device.

WEEE Statement

WEEE Disposal Instructions

Explains user responsibility for proper disposal of electronic waste in the EU.

Product Overview and Specifications

Model Differences

Explains variations between CyberMed and iOne models based on color and features.

Detailed Display, CPU, and Memory Specs

Lists display, CPU, memory, power, and communication specifications.

Detailed Specifications Part 2

Storage, Graphics, Durability, and Audio

Covers storage, graphics, IP ratings, and audio features.

I/O Ports, Camera, Battery, and OS Support

Lists I/O ports, camera, battery, and supported operating systems.

Environment, Color, and Weight

Specifies operating environment, available colors, and product weight.

Detailed Specifications Part 3

OSD Controls, System BIOS, and Security

Explains OSD buttons, system BIOS, and security features.

Power Information and Intended Use

Details power adapters, intended applications, and critical warnings.

Unpacking and Manual Guidance

Instructions for unpacking and reading the user manual.

Safety Instructions and Handling

Transporting and Placement Guidelines

Guidance on safely moving, transporting, and placing the unit.

Electrical and Power Source Safety

Precautions regarding power source, cords, and electrical safety.

Power Cord Handling and Environmental Precautions

Power Cord Handling and Disconnection

Details on connecting, disconnecting, and handling the power cord safely.

Environmental Factors and Precautions

Lists environmental conditions to avoid for safe operation.

Ventilation, Cleaning, and Servicing

Ventilation and Cleaning Procedures

Guidelines for proper ventilation and cleaning the unit.

Servicing, Repair, and Maintenance

Instructions for troubleshooting, repairs, and safety checks by qualified personnel.

System Overview

Front View Controls and Indicators

Identifies and describes the function of front panel buttons and indicators.

Side I/O Ports

Side I/O Ports Description

Details the connections available on the side of the unit.

Back View Ports

Back View Ports and Features

Describes the ports and features located on the back of the unit.

Bottom Panel I/O Ports

Bottom Panel I/O Ports Details

Detailed description of all input/output ports on the bottom panel.

On-Screen Display (OSD) Usage

Brightness and Contrast Adjustment

How to adjust screen brightness and contrast using OSD controls.

OSD Menu Navigation and Options

Explains OSD menu navigation, options, and factory reset.

Display Mode Switching

How to switch between system and monitor display modes.

Battery Information

Battery Specifications and Indicators

Details battery specs, charging, and LED status indicators.

Power Management

Power Management in Windows OS

Guide to using Windows OS for power management of display and hard drive.

Power Plan Configuration

Selecting and Customizing Power Plans

How to choose and customize power plans in Windows for energy saving.

Advanced Power Management Features

ENERGY STAR Monitor Power Management

How the system interacts with ENERGY STAR monitors for power saving.

Waking the System from Sleep Mode

Methods to wake the LCD-PC from power saving modes.

Cleaning Procedures

Cleaning the All-in-One PC Exterior

Instructions for safely cleaning the exterior of the PC unit.

Power Saving Configuration

Configuring Windows Power Saver Mode

Steps to change Windows power settings to 'Power saver' mode.

Display Brightness Adjustment

Adjusting Screen Brightness

Steps to adjust screen brightness levels in Windows 8.1 and 10.

Hardware Installation

Installing the Hard Disk Drive

Step-by-step guide for installing an HDD using the provided bracket and cables.

Battery Installation and Removal

Installing and Removing Batteries

Instructions for opening the battery door and inserting/removing batteries.

Appendix A: Battery Behavior

Battery Charging and Discharging

Explains how the system charges and discharges its batteries.

Appendix B: Battery Storage and Care

Battery Storage Guidelines

Recommendations for storing batteries to maintain performance and lifespan.

Cybernet E-recycling Program

E-recycling SOP

Outlines the steps for returning products for recycling.