EasyManuals Logo

CYBEX VR1 Owner's Manual

CYBEX VR1
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Cybex VR1 13240 Multi-Press Medical Owner’s Manual
Safety
Page 1-2
Facility Safety Precautions
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
Securely anchor each machine to the oor using the anchor holes provided in each
machine.
Make sure that each machine is set up and operated on a solid level surface.
Do not install
equipment on an uneven surface.
Make sure that all users are properly trained on how to use the equipment and proper supervision based on
individual indication is provided.
Make sure there is enough room for safe access and operation of the equipment.
NOTE: At least one meter
around machine when in exercise position.
Perform mandatory safety inspections. Perform regular maintenance checks on the equipment. Also pay
close attention to all areas most susceptible to wear, including (but not limited to) cables, pulleys, belts and
grips.
Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components, then remove from service until the repair is made.
Use only Cybex supplied components to maintain/repair the equipment.
Keep a repair log of all maintenance activities.
Inspect all cables and belts and connections prior to use. DO NOT use if any components are worn, frayed
or damaged.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.
NOTE: These machines do not have range limiting devices. Check range of movement of patient carefully before
using equipment. Select resistance according to the individual indication. If you are unsure then start at
lowest level. Perform exercises using smooth controlled movements.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a
professional contractor.
NOTE: Use fasteners having a minimum of 2,220 newtons tensile capacity.
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using at washers.

Other manuals for CYBEX VR1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CYBEX VR1 and is the answer not in the manual?

CYBEX VR1 Specifications

General IconGeneral
BrandCYBEX
ModelVR1
CategoryHome Gym
LanguageEnglish

Related product manuals