EasyManua.ls Logo

Cyclades AlterPath ACS Series User Manual

Cyclades AlterPath ACS Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This Quick Start Guide describes the AlterPath™ ACS basic installation tasks. The following table lists the tasks in
the order they should be performed.
The following illustration shows the basic connections corresponding to the above table.
1.
Mount the AlterPath ACS. Page 2
Y
Make an Ethernet Connection. Page 2
Z
Connect Servers or Devices. Page 2
[
Make a Direct Connection for Network Configuration. Page 3
\
Power On the ACS and the Connected Servers or Devices. Page 3
6.
Perform Basic Network Configuration. Page 3
7.
Select a Security Profile Page 6
8.
Add Users and Configure Ports Using the Web Manager. Page 7
DT LK
12345
6
7
8
1615
14
1312
1110
9
100-240V,50/60Hz, 0.3A - P1
10/100BASE-T
Console
COL
LK/
DT
100
cp
P1
P2
A
TM
C
S
6
1
Internet
Remote User
[
\
Y
Z
Server or device with a console port
Console User
AlterPath™ ACS Quick Start Guide
Question and Answer IconNeed help?

Do you have a question about the Cyclades AlterPath ACS Series and is the answer not in the manual?

Cyclades AlterPath ACS Series Specifications

General IconGeneral
BrandCyclades
ModelAlterPath ACS Series
CategoryServer
LanguageEnglish

Summary

Mount the AlterPath ACS

To Mount the ACS

Instructions for mounting the unit using brackets and screws provided with the mounting kit.

Mount the ACS in a Rack

Procedure for mounting the AlterPath ACS unit into a rack.

Make an Ethernet Connection

Connect Servers or Devices

To Connect Servers or Devices to the Serial Ports

Guide to connecting servers or devices via console ports using patch cables and adapters.

Make a Direct Connection for Network Configuration

To Connect to the Console Port

Steps for connecting a terminal or computer to the ACS console port for configuration.

Power On the ACS and the Connected Devices

Perform Basic Network Configuration

To Use the wiz Command to Configure Network Parameters

Detailed steps for configuring network parameters using the 'wiz' command on the ACS.

Select a Security Profile

To Select a Security Profile

Guide to selecting a security profile via the Web Manager interface for device security.

Add Users and Configure Ports Using the Web Manager

Related product manuals