Cyclo Toolmakers, Inc ∙ 1740 Skyway Drive ∙ Longmont, CO 80504
Phone: +1-303-485-1990 ∙ Fax: +1-303-723-8680 ∙ www.cyclotoolmakers.com
INSTRUCTION MANUAL
FOR
MODEL 5, 5C & 5CE CYCLO ORBITAL POLISHER/SANDER
This instruction manual is furnished with each Cyclo Model 5, 5C & 5CE Electric Polisher/Sander tool.
The entire manual should be read carefully before using the Cyclo Polisher/Sander tool and retained for future reference.
This manual contains separate sections to inform the purchaser of the tool on:
#1 SAFETY INSTRUCTIONS
#2 OPERATING INSTRUCTIONS
#3 POLISHERS, CLEANERS & PROTECTANTS
#4 USER MAINTENANCE & TROUBLESHOOTING
TECHNICAL SPECIFICATIONS:
Volts Cycle H.P. Amp
Model 5: 115 60 1/3 2.0 (.23kW)
Model 5C & 5CE: 230 50 1/3 1.0 (.23kW)
RPM: 2800 to 3200
Weight: 6.5 lbs (2.9 kg)
Noise Emissions - 5CE: 82.6 dBA
Vibration - 5CE (m/s
2
)*: Vertical Lateral Front-To-Back
Front Handle 26.3 30.2 18.4
2
To Next Page
Loading...