Super Fine Cutting & Polishing White Wool Pad (P/N 72-440)
Light Cutting White Wool Pad (P/N 72-455; former P/N 85-085)
Medium Cutting Yellow Foam Pad (P/N 72-160)
Heavy Cutting White Wool Pad (P/N 72-470)
2) In order to affix the Cyclo bonnets to the twin heads, first disconnect the power cord, then simply turn the polisher upside
down and rest it in your lap. Turn the bonnet inside out and place its rubber base squarely on one of the heads. Now, grip the head
and the bonnet firmly between both hands, and with the thumbs, turn the edge of the bonnet down over the head. Rotate the head
slightly and repeat the step above until the bonnet’s edge is completely over the head.
With the velcro pads, you install the jacket with Velcro attached in the same manner as above. However, to change pads just
peel off the used pads and attach a fresh pad by pressing it firmly in place centered on the velcro jacket.
3) The pads and bonnets should be cleaned as soon as possible after use with a good industrial cleaner or detergent. For best
results, wash the foam pads out by hand, squeeze dry (do not twist or wring) and let air dry. The wool pile pads should also be
washed with a good industrial cleaner or detergent and then run through with a brush. The wool pads and can also be washed in
warm water and tumble dried in a cool dryer.
CYCLO POLISHERS, CLEANERS & PROTECTANTS
Never try to use a rotary type polish or cleaner with the Cyclo polisher and never try to use Cyclo polishes with rotary tools. The
Cyclo products are specifically formulated for use with the Cyclo and though some hand application type polishes may give
satisfactory results, we recommend that for the BEST results only the laboratory and field tested genuine Cyclo products be used
with the Cyclo tool.
1) On painted surfaces use the CTI Pro Paint Care line or the CTI One Pass Express
CTI Pro Paint Care Line:
1. Compounding Gel – Removes scratches and heavy oxidation from surface. Very aggressive compounding polish
for use on any surface.
2. Cleaner-Deoxidizer – Great for removing hair line scratches and light to medium oxidation. Mild abrasion creates a
clean and smooth surface. Does not contain any shine components.
3. Cleaner-Deoxidizer – Great for removing hair line scratches and light to medium oxidation. Mild abrasion creates a
clean and smooth surface. Does not contain any shine components.
4. Polish and Protective Sealant – High poly sealant will give your surface 12-18 months of durable protections and
brilliant gloss.
CTI One Pass Express:
1. Cleaner-Polish-Sealant – With One Pass Express you can remove light scratches and environmental contaminants. It
quickly restores showroom color and brilliance and protects finishes with a weather resistant polish and silicone film.
2) On unpainted aluminum or stainless steel use the CTI Metal Polish:
CTI Metal Polish:
1. Free Flite
TM
Cleaner-Polish - Aggressive rubbing compound for badly oxidized aluminum and paint. Removes
corrosion, oxidation and surface film leaving a hard polished finish. Military standard for the armed forces including the
Air Force One fleet.
6
To Next Page
Loading...