CyClone Desert - Introduction to Product

90L/138L
PORTABLE DEHUMIDIFIER
I. IMPORTANT NOTICES FOR SAFETY
• Before application, please read all the instructions.
• Before application, please confirm that the power supply
is 220V/50HZ.
• Do not stop operation of the dehumidifier by pulling out
the power cord.
• Be careful with movement of dehumidifier and avoid
rolling on and damaging the wire.
• Do not put hand or stick-shape object to the grid.
• Do not allow kids to climb, stand or sit on the
dehumidifier.
• Disconnect the power cord before cleaning and repair.
• Please use appropriate power supply switch, do not use
plug and ensure safe earthing.
• Do not operate in closed and narrow room.
• Please keep this manual safely.
Note: We advice that any repair should be carried out by
professionals.
II. INTRODUCTION TO PRODUCT
Dehumidifier is able to reduce air humidity of the space,
leaving people to live，work and store goods in comfortable
environment.
Dehumidifier of our company possesses such advantages
of nice appearance, compact structure and easy operation.
It is widely applied to research and medical products,
commodity storage, underground project, kitchen, bathroom,
archives room, and warehouse for dehumidification. With this
dehumidifier, loss caused by damp, erosion and corrosion of
apparatuses and instruments can be prevented.
III. OPERATION INSTRUCTION
BUTTON FUNCTION
1.“On/Off”button
Press this button to start the machine, it enters start-up mode
after the buzzer buzzes twice
Press this button to stop the machine, it enters stop mode after
the buzzer buzzes once
2.“Time”button
Press this button for once，and it enters the mode of current
time setting，
Press this button for successively twice，it enters the mode of
preset start-up，
Press this button for successively three times，it enters the
mode of preset stop，
Press this button for successively four times，it exits the mode
of time pre-setting.
EN
3.“+”button
Press this button directly to increase the set humidity. Buzzer
buzzes once for each pressing and the set humidity decreases
by 1% RH. Successive operation can be achieved by pressing
this button successively. Press “Time” button before pressing
this button, the time(hour) can be increased.
4.“-”button
Press this button directly to decrease the set humidity. Buzzer
buzzes once for each pressing and the set humidity decreases
by 1%RH. Successively operation can be achieved by pressing
this button successively. Press “Time” button before pressing
this button, the time(minute) can be decreases.
IV. START-UP
1. Energize the power, the dehumidifier will beep for once;
2. Press the “On/Off” button for once, the LCD display is
light. After all the displays are normal, the LCD displays
current environment humidity;
3. Setting of humidity: press “+” and “-” buttons to set
the required humidity. When the set humidity is 3% less
than current humidity, the dehumidifier works; when
the set humidity is 3% more than current humidity，the
dehumidifier stops.
4. When the set humidity is less than 30%, the dehumidifier
enters the mode of successive dehumidification.
5. Setting of preset time: Press the “Time” button
for the first time, the“hour”time on the display
flashes，press“+”and“—”to adjust the current
hour and minute time，Press the“Time”button for
the second time，the“Start-up time”on the LCD
flashes，press“+”and“—”to adjust the current hour and
minute time，Press the“Time”button for the third time，the
“Stop time”on the LCD flashes，Press“+”and“—”to adjust
the current hour and time，Press the“Time”button for the
forth time，the mode of “preset time ”can be canceled.
6. After setting the mode of preset time, if the dehumidifier is
shut off, it will operate the whole mode of preset time; if it is
in operation, it will operate the mode of “preset stop time”.