EasyManua.ls Logo

CyClone Z-020 - Page 3

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
hands and arms. Make sure to keep a safe posture and firm footing.
Do not over-extend your body, take care on a stable balanced body as well as
secure footing to control the Device when an unexpected situation happens.
Do not use this Device when you are tired or influenced badly by medicine, alcohol
or drugs. Any carelessness will cause serious hurts.
Only use this Device in well-rested conditions.
Always wear adequate protective clothing and eye protection. Further protection
like dust masks, helmets, ear protection, work gloves or non-skid safety shoes are
required. These foregoing protections will reduce the risk of accidents and injuries
dramatically.
Long hairs and loose clothing could tangled up in rotating parts of the Device. It will
cause serious hurts.
To avoid switching on the Device by mistake, always make sure to disconnect the
Device from air supply when not in use, and then change accessories or do a
maintenance.
Always check the Device, hoses and fittings for damages or loose before use.
After changing accessories or doing a maintenance, make sure that any spanners or
other accessories will be removed before in use.
Make sure that you can firmly hold the Device against the counterforce.
Device in Use
The working-pressure input at an inlet of this Device is recommended to be
between 5.0 bar and 8.0 bar. If the working-pressure exceeds 8.0 bar, then the life
cycle of this Device may be reduced and this Device may cause an unexpected
injury. If the working-pressure is less than 5.0 bar, then this Device may not
perform a good cleaning outcome.
The recommended working-pressure at an inlet of this Device is 6.2 Bar.
If the working-pressure of air-compressed source is out of the range between 5.0
~ 8.0 bar, then the Device is forbade to use.
This Device and accessories thereof must not be modified.
Any part of this Device is subject to wear and this can lead to fatigue of this Device.
Please prepare some spare parts for replacement.
Do not lay down this Device before all the rotary parts stops working.
Do not keep the Device running while carrying it.
Keep your hand away from the rotating parts.