Protection Mechanism
1.The inflator will automatically shut off after continuous inflation for 1 minute
and when the air pressure remains below 5 PSI,to prevent continuous
ineffective operation.
2.After 3 minutes of continuous inflation, the inflator will automatically shut
down to prevent prolonged operation due to abnormal conditions, If the
inflation target hasn't been reached due to the object being too large, please
restart the inflator for inflation
3.When the internal temperature of the inflator exceeds the limit, it will
immediatelystopworking and displaythe "HOT"on the screen.Pleasewait for
the inflator to cool down before using it again
Notes
1. Fully charge the inflator before use
2.The inflator may get hot during operation, and please use it with the
silicone case,
3. Pressthe inflator against the valve before and during inflation, and adjust
the position to prevent air leakage.
4 It is normal to feel a sense of traction when pulling the inflator off a presta
valve after inflation.
5.While inflating using a ball needle, the displayed air pressure may be
higher than the actual air pressure Please refer to the air pressure value
displayed after inflation is completed
Charge
Charge it with a suitable charger.
While charging, the screen battery
indicator light illuminates and flashes
incrementally.
Once the battery is fully charged,
all the battery indicator lights will be
illuminated.
Specifications
Size: mm
Battery 600mAh 11. 6.66Wh
Current: 2 5-5 5 A
Factory Info
Battery level display
Weight: 205g
Charglng Port: Type-C 5V 1.5A
Max Pressure 120 PSI
Manufacturer: Chengdu Chendian Intelligent Technology Co., td
Warranty: Freerepair or replacement within one year after purchase.
After-sales email: steven@cycplus.com
To Previous Page
Loading...
