Cycplus CUBE - Usage Notes and Tips; Pre-Use Charging; Heat and Silicone Cover; Preventing Air Leakage

Indicator Light
Notes
Fully charge the pump before use.
The pump may get hot during operation, and please
use it with the silicone cover.
Press the pump against the valve before and during
ination, and adjust the position to prevent air
leakage.
It is normal to feel a sense of traction when pulling
the pump o a presta valve after ination.
Charging
Charge it with a suitable charger. It takes
about 25 minutes to fully charge the
inator, during which time the indicator
light will keep ashing in red, and always
on green when nished. It can pump for
about 200 s on one full charge.
1.
2.
3.
4.
Manufacturer
Chengdu Chendian Intelligent Technology Co., Ltd
Warranty
Free replacement or repair within 1 year.
After Sale Seice
700C25 0-60PSI 50~60 sec
Tire Type Pressure
Inating Time
4
Available Times
700C25 0-80PSI 80~90 sec
2
700C25 0-100PSI 150~160 sec
1
26x1.95
26x1.95
0-35PSI
0-50PSI
70~80 sec
120~130 sec
2
1
The experimental data are for reference only.
Working peormance when full charged:
03
steven@cycplus.com