M4-CYG3-M-ENG_Iss2.doc
104
Fig. 11.6. Thickness Measurement Points.
Next click on the User Fields tab. We will create the 3 User Fields
to collect values for “Surveyor, “Location” and “Tank Size”. Fig.
11.7 shows the completed form, follow these steps:
1. Type in the three names, SURVEYOR, LOCATION and TANK
SIZE in the Name fields. This will create 3 User Fields.
2. Type in the three cell names in the Cell Ref. fields.
3. The Data Type for SURVEYOR and LOCATION can be left as
Alphanumeric as we want the surveyor to enter both letters
and numbers.
4. Change the Data Type for TANK SIZE to List. We are going
to enter in a list of tank sizes we want the surveyor to choose
from.
5. Click on the View List button for the TANK SIZE User Field,
you will see the Edit User Field List Items dialog, shown in
fig. 11.8.
6. Type in the three tank size names in the Item field, like in
fig. 11.8. Note these are only text labels used for this
example, you could type anything up to 40 characters long.
7. Close and Save the Item List dialog.
To Next Page
Loading...