Cygnus 3 User Manual

M4-CYG3-M-ENG_Iss2.doc
Cygnus 3 Operating Manual
13
Fitting the Protective Sleeve
The Gauge is supplied with a protective Silicone Sleeve that fits
over the Gauge. This sleeve is designed to protect the Gauge
against bumps, scratches and dirt while in use whilst still allowing
Gauge operation and battery replacement.
To insert the Gauge simply push the Gauge down into the sleeve,
a lip at the top of the sleeve will retain the Gauge once fully
inserted.
The Gauge is removed by pushing it out from the bottom.
The sleeve also allows the Gauge to be worn on a belt or
suspended from the Neck Strap included in the kit.

Cygnus 3 Specifications

General

Probe Frequency	5 MHz
Display	LCD
Protection	IP65
Communication Interface	USB
Accuracy	±1%
Operating Temperature	-10°C to 50°C
Measurement Channels	1
Operating Temperature Range	-10°C to 50°C