Cygnus 3 - Page 26

Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
26
Old Style
Probes
Inox Probes with
BNC Connectors
Inox Remote
Probes
Coloured Probe Face
Coloured Ring under
BNC connector
Coloured Band on
Probe Cap
Automatic Probe Frequency Setting
The Gauge will automatically detect the frequency of the probe
connected and set the Gauge accordingly. The probe frequency is
displayed in the top right corner of the screen.
2.25 MHz Probe Detected.
3.5 MHz Probe Detected.
5.0 MHz Probe Detected.