Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
52
the left, i.e. “P1” for Point 1.
To log the displayed thickness
measurement press the LOG key
The gauge will give a BEEP and
the display will flash-black.
When the data has been saved
the green LED will flash.
The gauge is now waiting for the
next thickness measurement.
Note the number of logged
measurements and next point
name have moved on.
measurements points have been
logged close the record by
selecting STOP LOGGING from
the DATA LOGGER MENU (see
page
61)
Grid Point Record Files
Grid Point record files are used to organise thickness
measurements across a two dimensional grid. The grid can be
applied to flat plate or cylinders alike.
To Next Page
Loading...