Cygnus 3 - Page 63

M4-CYG3-M-ENG_Iss2.doc
Cygnus 3 Operating Manual
63
Moving Position in the current Record File
While data logging, the position where the next thickness
measurement will be saved can be moved back to overwrite an
existing value. It is not possible to move forward beyond the last
thickness measurement logged.
1.
To move position the gauge
must be in data logging mode.
2.
To move position select MOVE
POSITION from the DATA
LOGGER MENU
Obstruction
preventing access to
measurement points.
plate
8.6
8.5
8.5
OBS
8.7
8.6
8.7
8.5
OBS
8.5
8.4
NOR
8.5
OBS
8.6
NOR
8.4
8.5
OBS
8.4
Measurement points
logged as Obstructed
(OBS)
Measurement point
logged as No-reading
(NOR)