Cygnus 3 - Page 62

Cygnus 3 Operating Manual
M4-CYG3-M-ENG_Iss2.doc
62
3.
To resume the last record file
select CONTINUE LAST from the
DATA LOGGER MENU
4.
Confirm OK or EXIT
Logging an Obstruction or No-Reading Point
When surveying there may be measurement points that are
inaccessible due to an object being in the way or there may be
points where thickness readings can’t be obtained (due to
excessive corrosion for example). The Gauge allows the user to
record either a No-Reading or Obstructed measurement point as
required.
Pressing the LOG key when no
thickness value is displayed gives
the option to select either an
Obstruction or a No-Reading or Exit
to cancel.