Cygnus 3 Operating Manual
measurement is below the
minimum thickness specified the
user is alerted by a message, a
beep and the RED LED is
illuminated
measurement has been entered
a message alerts the user the
record has been completed.
Press OK.
Data Logging Functions and Management
Stopping, Suspending and Resuming Data Logging
Any Record File can easily be stopped and later resumed. When
data logging is stopped the Gauge will operate as normal except
thickness measurements can’t be logged. When using a Quick Log
Record data logging must be stopped to complete the record, as
there is no pre-set number of measurement points.
To stop or suspend data logging
select STOP LOGGING from the
DATA LOGGER MENU
You will be asked to confirm if
you want to Stop Logging.
Once suspended the gauge can
be used as normal
To Next Page
Loading...