Cygnus 3 Operating Manual
The current text comment is
displayed if there already is one.
To edit this comment or add a
new one press the EDIT key.
To remove the comment press
Displaying the Current Record File Details
To view the record details the
gauge must be in data logging
To view record details select
RECORD DETAILS from the
DATA LOGGER MENU
The screen shows the record
details. Press OK to close.
Reviewing Template File User Fields
When a Record File has been created using a Template File there
may be up to 40 user fields contained in the record. Normally
these User Fields will have been completed when the Record File
was created but this data can also be viewed and edited while the
record file is open.
To view the User Field data the
gauge must be in logging mode
with a Template record file
To Next Page
Loading...