Changing the Velocity or Calibration while Data Logging
While data logging the velocity of sound or the calibration can’t be
changed.
When a Record File is created the current velocity value is copied
into the record file, the velocity value is then locked while data
logging. The velocity value will be included in the report print out.
Auto-Log Function
The Auto-Log function will automatically ‘LOG’ thickness
measurements to the current record file each time the probe is
coupled and a valid and stable thickness measurement is taken
and held.
This feature can speed up data logging as you don’t need to keep
pressing the LOG key each time enabling you to quickly progress
along the object being surveyed.
To Next Page
Loading...