77
‘Transfer Records from Gauge’. The ‘Transfer Records from
Data Logger’ dialog box will be displayed, Fig 9.5.
The drive letter should be correct, but it can be changed here
using the drop-down list.
When a Gauge has been detected the Record File List in the dialog
box will populate with all the record files on the Gauge’s memory
card.
Fig 9.5 Transfer Records from Data Logger
Simply select the records to transfer by clicking on their ‘Row
Selectors’ - hold the shift key to select multiple records. Then click
‘Transfer’, the selected record files will then be copied from the
Gauge’s memory card to the computer.
There is also the option to remove the transferred record files from
the Gauge and to overwrite any existing files on the computer.
To Next Page
Loading...