CYKLOP CMT 250 User Manual

09.09
CMT 250
Akku-Handgerät zum Umreifen mit Kunststoffband
Battery-hand tool for plastic strapping
Batterihåndapparat til omsnøring med kunststofbånd
Ab Serie-Nr. CMT/91001
From series no CMT/91001
Fra serienummer CMT/91001
DEUTSCH
ENGLISH
DANSK
Vor dem Gebrauch des
Gerätes die Betriebs-
anleitung aufmerksam
lesen.
Before using the tool,
read the operating
instructions carefully.
Læs betjeningsvejled-
ningen grundigt igen-
nem, inden værktøjet
tages i brug.
BETRIEBSANLEITUNG Originalbetriebsanleitung
OPERATING INSTRUCTIONS Translation of original manual
BETJENINGSVEJLEDNING Oversættelse af den originale
Patent angemeldet
Patent pending
Patent afventes

CYKLOP CMT 250 Specifications

General

Brand	CYKLOP
Model	CMT 250
Category	Power Tool
Language	English

Summary

CMT 250 Battery-Hand Tool

Quick Start Guide

Battery Charging and Insertion

Instructions for charging and inserting the battery.

Basic Operation Overview

Visual steps for starting tool operation.

Technical Data

Tool Specifications

Safety Instructions

General Safety Precautions

Read manual, use trained personnel, wear PPE, check power.

Strap Handling Safety

Warnings regarding strap snapping, breaking, and crushing.

Intended Use and Misuse

Tool Description

Operating Panel Details

Operating the Tool

Battery Charging Procedures

Detailed steps and indicators for charging the battery.

Tool Usage Guide

How to insert battery and position the strap for packaging.

Operating Instructions

Battery Charging and Tool Operation

Continued instructions for charging battery and operating the tool.

Settings and Adjustments

Setting Operational Modes

Adjusting Tool Parameters

Setting Strap Tension and Soft Tension

Adjusting strap tension and configuring soft tension parameters.

Setting Welding Time and Strap Width

Maintenance and Repair

Troubleshooting Guide

Error Code Solutions

Lists common error codes (E11, E20, E22, E23, E37) and their remedies.