What to do if my CYKLOP LIGOTECH LGT 260 shows over-current protection?
If your CYKLOP Packaging equipment shows an over-current protection fault, you can clear the fault and enter standby mode by pressing any button.
What to do if the motor is still outputting torque when the speed of the motor is 0 rpm/motor rotor locked in CYKLOP Packaging equipment?
If your CYKLOP Packaging equipment motor is still outputting torque when the speed of the motor is 0 rpm or the motor rotor is locked, you can remove the fault by pressing any button to enter the standby mode.
How to fix tension motor timeout fault in CYKLOP LIGOTECH LGT 260?
If your CYKLOP Packaging equipment displays a tension motor timeout fault, you can resolve it by pressing any button. This action will return the device to standby mode.
What to do if there is a short circuit fault of tension motor in CYKLOP LIGOTECH LGT 260?
If your CYKLOP Packaging equipment shows a short circuit fault of the tension motor, you can clear this error by pressing any button, which will then put the equipment into standby mode.
What to do if welding motor Hall is abnormal/abnormal current induction of welding motor in CYKLOP LIGOTECH LGT 260 Packaging equipment?
If your CYKLOP Packaging equipment has a welding motor Hall abnormality or abnormal current induction, you can clear the fault by pressing any button to enter standby mode.
What to do if tension motor Hall is abnormal/abnormal current induction of tension motor in CYKLOP LIGOTECH LGT 260 Packaging equipment?
If your CYKLOP Packaging equipment displays a tension motor Hall abnormality or abnormal current induction, you can clear the fault by pressing any button to enter standby mode.
Guidelines for operator alertness, common sense, and protective equipment during use.
Ensuring a clean, well-lit work area and keeping bystanders away.
Proper usage, maintenance, and handling of power tools and their batteries.
Avoiding incorrect operation, strap issues, and following best practices for safe strapping.
Recommendations for tool servicing, cleaning, and parts replacement to ensure safety.
Overview of the LGT260 tool's features, dimensions, and strap compatibility.
Details on strap tensioning capabilities and optimal operating temperature range.
Information on battery type, voltage, capacity, and charger specifications.
Details on the optional suspension system for the strapping tool.
Identification of control panel elements, buttons, indicators, and their functions.
Procedures for installing, removing, and charging the battery.
Explanation of the control panel, modes, settings, and button functions.
Step-by-step guide to strapping, operating modes, and adjusting for optimal results.
Schematic showing connections between the main board, motors, and indicators.
List of error codes and their descriptions for diagnosing machine issues.
Guide to identifying causes and solutions for common tool malfunctions.
Instructions for replacing common wear parts like cutters and toothed plates.
Comprehensive list of part codes, descriptions, and quantities for ordering spares.
Visual representation of the tool's components with part number references.
General| Brand | CYKLOP |
|---|---|
| Model | LIGOTECH LGT 260 |
| Category | Packaging equipment |
| Language | English |
To Next Page
