Cyklos GPM 450 SPEED User Manual

Operating Instructions
Issue no.
4
Sheets
35
Automatic Creasing, Perforating and
Punching Machine GPM 450 SPEED
Warnings
This document including the attachments is exclusive intellectual property of Cyklos Choltice (producer
cooperative). Any other use (copying, distribution or sale) is possible only with approval of the chairman of
the cooperative.
Valid from serial number
17123999

Cyklos GPM 450 SPEED Specifications

General

Brand	Cyklos
Model	GPM 450 SPEED
Category	Binding Machine
Language	English

Summary

1. INTRODUCTION

2. SAFETY RISKS

2.1 Safety Warning

General warnings about potential hazards and risks during operation.

2.2 General Work Safety and Health Protection

Guidelines for safe operation and operator health protection.

3. WARNINGS

4. TECHNICAL PARAMETERS

5. MACHINE DESCRIPTION

6. MACHINE INSTALLATION

7. ADJUSTMENT OF MACHINE AND FEEDING TABLE

7.1 Introduction

Brief overview of machine and feeding table adjustment.

7.2 Table Adjustment Procedures

Detailed steps for adjusting the feeding table, thrust, paper placement, auxiliary head, and callipers.

8. SETTING MACHINE USING TOUCH SCREEN

8.1 Display Unit Preview and "SETTING" Screen

Introduction to the machine's touch screen interface.

8.2 Touch Screen Function Icons Overview

Explains various icons and their functions including Manual Control, Info, Language, and Service Menu.

8.3 Setting Creases and Perforations

Configuration of crease and perforation parameters, including common folds and segment settings.

8.4 Speed, Batch, and Program Settings

Adjusting speed, batch count, and saving/loading programs.

8.7 Starting Working Cycle

Procedures for initiating the machine's operation.

8.8 Manual Control and Adjustments

Operating manually and fine-tuning parts like the top bar and automatic feed.

9. THE MOST COMMON FAULTS (TROUBLESHOOTING)

9.1 Crinkled Paper

Troubleshooting steps for paper creasing during feeding.

9.2 Start Key and Paper Feed Issues

Addresses problems with the start key, paper jamming, and feeding wheels.

9.3 Quality and Control Problems

Resolving uneven perforation, display key issues, and auxiliary head problems.

9.4 Paper Alignment and Sensor Issues

Correcting paper skew, dark paper sensor, and wheel wear.

10. RECOMMENDED MACHINE MAINTENANCE

11. MACHINE DISPOSAL

APPENDIX 1: ACCESSORIES

APPENDIX 2: INSTRUCTIONS FOR TABLE ASSEMBLY

APPENDIX 3: OPTIONAL ACCESSORY