Do you have a question about the Cyklos RPM 350 Plus and is the answer not in the manual?
Type | Creasing and Perforating Machine |
---|---|
Max Paper Size | 350 mm |
Paper Weight | 80-400 gsm |
Weight | 42 kg |
Supported Media Types | Paper |
Media Width | 350 mm |
Read all instructions, check parts, avoid hazards before starting operation.
Install and connect the input feeding table securely as per instructions.
Connect power, start machine, check display for errors, and restart procedures.
Explains machine status symbols like 'P', 'blc', 'E-1'/'E-2', and diagnostic indicators.
Adjust feeding table, T-squares, stop screws, and centering for proper sheet alignment.
Adjust output table based on sheet size and utilize bridge/backstop for stacking.
Unplug machine, open cover, loosen screws to adjust or remove perforating/creasing tools.