Why is my cymatic audio LP-16 MP3 Player not recognized by my Windows PC?
Ensure that there is no USB storage device connected to the front panel USB storage connector of the cymatic audio LP-16 MP3 Player. Connecting a USB storage device will automatically put the LP-16 into “recorder mode,” preventing its use as a computer audio interface.
What to do if the cymatic audio LP-16 MP3 Player signal is too loud with powered speakers?
To use the line outputs of the cymatic audio LP-16 MP3 Player with powered speakers, consider these options: * Connect the outputs to powered speakers that have their own volume control. * Connect the LP-16's output to the line inputs of a small desktop audio mixer or standalone volume control unit, then connect those outputs to your powered monitors. This is because the line outputs of the LP-16 do not have a volume control of their own.
How to create a playlist for cymatic audio LP-16 MP3 Player?
Playlists for the cymatic audio LP-16 MP3 Player are created using the external, Windows compatible LP-16 playlist software. Download the playlist software and refer to its documentation on how to create a playlist, then export it to a USB drive that you connect to your LP-16.
What to do if USB device doesn't pass device test on cymatic audio LP-16 MP3 Player?
The connected USB device must be formatted in the FAT-32 format. Format as FAT-32 on your computer, or allow the cymatic audio LP-16 MP3 Player to format the device.
How to create playlist from manually copied files on cymatic audio LP-16 MP3 Player?
The LP-16’s external playlist software is required to configure a playlist and copy it to an attached USB drive. See the user’s manual for the external playlist software for more details.
What to do if playback behavior isn't working as expected on cymatic audio LP-16 MP3 Player?
From the stereo player menu, select “Playback Mode” and make sure you have configured the specific playback mode that corresponds to the playback behavior you desire for your cymatic audio LP-16 MP3 Player.
Where is the Macintosh OS X version of monitor mixer control panel for cymatic audio MP3 Player?
Currently, no OS X version of the monitor mixer control panel is available for cymatic audio MP3 Player.
Guidelines for using the correct power adapter and safe disconnection procedures.
Precautions for avoiding hazardous environmental conditions like extreme temperatures or moisture.
Instructions for safe physical handling of the device, avoiding liquids and pressure.
Safety procedures for connecting cables and power, including turning off the unit.
Warning against modifying the product and its implications on the warranty.
Caution regarding high headphone volume and potential hearing damage.
Advice on minimizing electromagnetic interference with the device.
Instructions on how to safely clean the LP-16 unit using a soft cloth.
Primary operational mode for playback of up to 16 separate audio tracks.
Mode ideal for playback of stereo audio files like pre-show or break music.
Allows the LP-16 to function as a 2-input, 18-output audio interface.
Details the connectors and controls on the front panel of the LP-16.
Describes the connectors and indicators on the rear panel of the LP-16.
Illustrates and explains the controls and display on the top panel of the LP-16.
How to navigate between songs using skip forward/back buttons.
Explains the function of the stop button for pausing and stopping playback.
Methods for navigating to and selecting playlist folders.
Describes the display and information shown on the MT mode home screen.
Details menu options including playback modes, playlists, MIDI, footswitch, and display settings.
Details the display and settings for the ST mode home screen.
Explains settings for playback modes, playlists, and output channels in ST mode.
How to connect the LP-16 to mixers using unbalanced line inputs.
How to connect to mixers using balanced line inputs, including adapter use.
System requirements, driver installation, and connection for using LP-16 with Windows.
Details the LP-16 mixer control panel for PC, including sync, buffer, channel settings, and version information.
Solutions for common problems encountered in standalone player mode.
Solutions for problems when using the LP-16 as a USB audio interface.
Outlines what is covered and not covered by the product warranty.
Lists trademark acknowledgments and legal notices.
General| Number of Outputs | 16 |
|---|---|
| Simultaneous Tracks | 16 |
| MIDI I/O | In/Out |
| Word Clock | Yes |
| Channels | 16 |
| Display | LCD |
| Audio Formats Supported | MP3, WAV, AIFF |
| Media | USB, SD Card |
| Sample Rate | 44.1 kHz |
| Bit Depth | 24-bit |
| Analog Outputs | 16 |
| Connectivity | MIDI, USB |
To Next Page
