Need help?Do you have a question about the Cynosure SculpSure and is the answer not in the manual?
General| Type | Non-invasive body contouring system |
|---|---|
| Wavelength | 1060 nm |
| Treatment Time | 25 minutes |
| Cooling | Contact cooling |
| Technology | Diode laser |
| Applicators | 4 applicators simultaneously |
| FDA Clearance | Yes |
| Treatment Areas | Abdomen, flanks, back, inner thighs, outer thighs, submental area |
| Targeted Tissue | Adipose tissue |
Non-invasive lipolysis of flank/abdomen for aesthetic use in individuals with BMI <= 30.
Lists conditions where SculpSure treatment is not recommended, e.g., open wounds, pregnancy.
Describes potential hazards and precautions for safe laser system operation.
General safety guidelines for personnel operating and maintaining the SculpSure System.
Operator guidelines for safe use of the SculpSure Laser, emphasizing contraindications and precautions.
Highlights the SculpSure Laser's features designed to prevent misuse or unintentional activation.
Explains the function of the PAC Key for system operation and credit consumption.
Provides step-by-step instructions for removing and attaching applicators.
Step-by-step instructions for safely installing an applicator onto the system.
Instructions on how to terminate a treatment session early and confirmation dialogs.
Explains system behavior and user actions upon loss of applicator-to-skin contact.
Details the process of electronically linking or unlinking applicators for synchronized or independent adjustment.
Step-by-step instructions for starting the SculpSure laser system.
Guide to adjusting build and sustain energy levels for treatment.
Procedures for safely shutting down the SculpSure laser system.
Provides guidance on identifying and resolving system faults and errors.
Lists fault codes, their descriptions, and recommended user actions for troubleshooting.
Presents common problems, their possible causes, and solutions for troubleshooting.
Details Cynosure's customer service policy, including training, repair, and checks.
Step-by-step procedure for authorized personnel to replace the system's coin battery.
Details procedures for calibrating the laser system.
To Next Page
