CYP CLUX-11SA - Front Panel Overview; Rear Panel Connections

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
LPCM
5.1/7.1CH
2CH
BITSTREAM
DC 5V
HDMI INPUT
POWER
CLUX-11SA HDMI LPCM 7.1 DECODER
1 2 3 4
1
HDMI INPUT: Connect the HDMI input port to the HDMI output port
of your source equipment such as a DVD player or Set-top Box.
2
AUDIO Output Switch: Switch among Bitstream/LPCM 7.1/5.1 or
LPCM 2 channels.
Note: When switch to other audio mode, the display will disappear
for a few seconds. This is normal phenomenon for the system.
3
POWER LED: The LED will illuminate when the power is connected.
4
DC 5V: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
6.2 Rear Panel
OPTICAL OUTMULTI CHANNEL OUTHDMI OUT
FL/FR LFE/FC RL/RRRLC/RRC
1 2 3
1
HDMI OUT: Connect the HDMI output port to the HDMI input port of
your display or AV receiver.
2
MULTI CHANNEL OUT: Connect the audio channel output to the
input of your amplier equipment or surround sound speakers,
following below channel conguration.
- FL/FR: Front Left and Front Right
- LFE/FC: Low Frequency Effect and Front Center
- RL/RR: Rear Left and Rear Right
- RLC/RRC: Rear Left Center and Rear Right Center
3
OPTICAL OUT: Connect Optical output to the display audio input or
audio equipment.