14
EDID Update LED Confirmation Status
No.
EDID EDID Single LED EDID Video HDMI
DescriptionSwitch key
3G
HD
SD
Update
Lock
/DVI
1 Update Pressed On
● ●
3G Native, HDMI mode, Read OK
2 Update Pressed On
●
●
HD Native, HDMI mode, Read OK
3 Update Pressed On
● ●
SD Native, HDMI mode, Read OK
4 Update Pressed On
● ● ●
No support timing, HDMI mode, Read OK
5 Update Pressed On
● ●
●
3G Native, DVI mode, Read OK (Note4)
6 Update Pressed On
●
●
●
HD Native, DVI mode, Read OK (Note4)
7 Update Pressed On
● ●
●
SD Native, DVI mode, Read OK (Note4)
8 Update Pressed On
● ● ●
●
EDID format error (Note5)
9 Update Pressed On
● ● ●
● ●
No connection or connection error
Note
1. Key:
"
" LED On
"
●
" LED Off
"
" LED Flashing
2. Only when the EDID button is being pressed and hold consistantly will the EDID update progress. When the
update is complete the Video Lock LED will illuminate. If the button is not pressed the LED will illuminate
according to “System Operation LED Signal Status”.
3. The output HDMI source's output resolution is based on output display monitor/TV’s EDID settings but
results may vary with different sources. The EDID update function is designed to resolve compatibility issue
such as these.
4. When DVI EDID settings are detected, the system will check if the EDID’s native mode supports SDI timing. If
it does, the image will be displayed in the formats in No. 5,6 & 7. If not, the system will automatically copy
the default DVI EDID (Native 3G) mode and displayed in the format in No. 5.
5. EDID format errors include: Header error, Checksum error and EDID error. Under this condition the default
EDID or the updated EDID will not be updated.
To Next Page
Loading...
