9
6
HDMI OUT: This slot is to connect with HDMI TV/monitor for display
HDMI input source signal.
7
Power LED: This LED will illuminate when the device is connected to a
power supply.
8
LINK LED: This LED will illuminate when both the input source and
output display signals are connected through CAT cable. When it
blinks regularly it indicates the display is NOT sending signals to the
Receiver but the Transmitter and Receiver are linked and if it blinks
irregularly it indicates an error has occurred.
6.2 Rear Panel
1
1
CAT5e/6/7 IN: Connect to the Transmitter unit with a single
To Next Page
Loading...
