6
1. INTRODUCTION
The QU-8MS Distribution Amplifier (splitter) accepts one HDMI input and
splits this signal to eight identical outputs. This device is 3D compatible
and features a 3D signal indicator which confirms when a 3D source signal
is detected.
The System Reset Function switch generates a command every 10
minutes to the connected displays which resets them to the correct HDMI
input. Each buffered output can run 1080p/8-bit up to 15 metres and can
also be cascaded in multiple layers.
2. APPLICATIONS
Display HDMI and 3D content
Simultaneously display content on multiple screens.
Retail store/Conference/Advertising display
3. PACKAGE CONTENTS
1 by 8 HDMI 3D Splitter
Operation Manual
5V/3A DC Power Adaptor
To Next Page
Loading...
