page 10 - CYPRES 2 User’s Guide -
2. Product overview
CYPRES 2 is available in six models:
Expert CYPRES 2
Student CYPRES 2
Tandem CYPRES 2
Speed CYPRES 2
changeable MODE CYPRES 2
Wing Suit CYPRES 2
Converting models
A conversion between the four
CYPRES 2
models
Expert - Student - Tandem - Speed is possible.
This procedure has to be performed by the manu-
facturer or the service center. This includes new
settings, a new color corresponding button, a new
label, and a complete functional test.
After a model change, the settings of the chosen
model will be reset to the standard settings (see
chapter 14).
Use in a 1-pin reserve container and
the use in a 2-pin reserve container
All CYPRES can be used in both container types.
With the plug-and-socket cutter connection a swap
from 1-pin cutter to 2-pin cutter or vice versa can
be simply done by unplugging and plugging-in
without opening the unit and without the use of
any tools. (See chapter 6)
Feet / Meter version
Every new CYPRES can either display altitude in
feet or meters. If your CYPRES does not meet your
personal preference, see chapter 4.4.5 for changing
the scale of the dropzone offset from feet to meter
or vice versa. Once you have set it, leave it as long
as the unit is in your use.
(If your CYPRES does not show
or
on the display when changing the dropzone offset,
then it is an older version that is not capable of
switching the scales.)
To Next Page
Loading...