1
2
3
4
5
1
2
4
5
Die rot nummerierten Objekte zeigen die CYPRES Elemente (1. Zen-
traleinheit, 2. Cutter, 3. Cutterkabel, 4. Bedienteilkabel, 5. Bedienteil)
3
The red numbered objects show the CYPRES elements (1. central
unit, 2. cutter, 3. cutter cabel, 4. control unit cable, 5. control unit )
ab
If you’ve lost the card, you can get a new one
from Airtec or SSK.
original card located in the back cover
13. Regarding Air Travel
A CYPRES equipped rig may be transported
in freight and passenger airplanes without re-
strictions. All its components (e.g. measuring
technique, electronics, power supply, loop cutter,
control unit, plugs, cables, casing) as well as the
complete system, contain parts and materials that
are approved by U.S. DOT and other agencies
worldwide, and are not subject to any transport
regulations.
Because of the size of a rig we recommend to check
it in as normal luggage and to not take it on board
as hand luggage. In case of questions or objec-
tions of the security personnel, please use the card
shown on the right which you’ll nd in the back
cover of this book. The card shows an X-ray of a
complete rig with CYPRES 2. Depending on type
and design of the rig the X-ray on the security’s
screen may vary.
The Parachute Industry Association and the USPA
have worked with the Transportation Security
Agency concerning traveling with parachutes.
Refer to USPA’s web site (www.USPA.org) for the
latest recommendations and documents.
To Next Page
Loading...
