CY7C68013A, CY7C68014A
CY7C68015A, CY7C68016A
Document #: 38-08032 Rev. *L Page 61 of 62
Document History Page
Document Title: CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A, EZ-USB FX2LP™ USB Microcontroller
High-Speed USB Peripheral Controller
Document Number: 38-08032
REV. ECN NO.
Issue
Date
Orig. of
Change
Description of Change
** 124316 03/17/03 VCS New data sheet
*A 128461 09/02/03 VCS Added PN CY7C68015A throughout data sheet
Modified Figure 1 to add ECC block and fix errors
Removed word “compatible” where associated with I
2
C
Corrected grammar and formatting in various locations
Updated Sections 3.2.1, 3.9, 3.11, Table 9, Section 5.0
Added Sections 3.15, 3.18.4, 3.20
Modified Figure 5 for clarity
Updated Figure 36 to match current spec revision
*B 130335 10/09/03 KKV Restored PRELIMINARY to header (had been removed in error from rev. *A)
*C 131673 02/12/04 KKU Section 8.1 changed “certified” to “compliant”
Table 14 added parameter V
IH_X
and V
IL_X
Added Sequence diagrams Section 9.16
Updated Ordering information with lead-free parts
Updated Registry Summary
Section 3.12.4:example changed to column 8 from column 9
Updated Figure 14 memory write timing Diagram
Updated section 3.9 (reset)
Updated section 3.15 ECC Generation
*D 230713 See ECN KKU Changed Lead free Marketing part numbers in Table 33 as per spec change in 28-00054.
*E 242398 See ECN TMD Minor Change: data sheet posted to the web,
*F 271169 See ECN MON Added USB-IF Test ID number
Added USB 2.0 logo
Added values for Isusp, Icc, Power Dissipation, Vih_x, Vil_x
Changed VCC from +
10% to + 5%
Changed E-Pad size to 4.3 mm x 5.0 mm
Changed PKTEND to FLAGS output propagation delay (asynchronous interface) in
Table 28 from a max value of 70 ns to 115 ns
*G 316313 See ECN MON Removed CY7C68013A-56PVXCT part availability
Added parts ideal for battery powered applications: CY7C68014A, CY7C68016A
Provided additional timing restrictions and requirement about the use of PKETEND pin to
commit a short one byte/word packet subsequent to committing a packet automatically
(when in auto mode).
Added Min Vcc Ramp Up time (0 to 3.3v)
*H 338901 See ECN MON Added information about the AUTOPTR1/AUTOPTR2 address timing with regards to data
memory read/write timing diagram.
Removed TBD for Min value of Clock to FIFO Data Output Propagation Delay (t
XFD
) for
Slave FIFO Synchronous Read
Changed Table 33 to include part CY7C68016A-56LFXC in the part listed for battery
powered applications
Added register GPCR2 in register summary
*I 371097 See ECN MON Added timing for strobing RD#/WR# signals when using PortC strobe feature (Section 10.5)
*J 397239 See ECN MON Removed XTALINSRC register from register summary.
Changed Vcc margins to +
10%
Added 56-pin VFBGA Pin Package Diagram
Added 56-pin VFBGA definition in pin listing
Added RDK part number to the Ordering Information table
[+] Feedback [+] Feedback
To Next Page
Loading...